亚洲va中文字幕无码毛片,久久久久久亚洲精品无码,久久久久久九九99精品,国产成人免费ā片在线观看,国产精品国产三级国产av剧情,国产精品久久久久aaaa,人妻久久久一区二区三区,久久精品国产精品亚洲艾草网,久久精品国产一区二区三区不卡,亚洲av毛片一区二区三区

<samp id="gccwo"></samp>
  • <ul id="gccwo"></ul>
  • 技術文章

    Technical articles

    當前位置:首頁技術文章自供電 p-GaN/i-ZnGa O24 /n-ITO 異質結寬帶紫外線光電探測器與高工作溫度

    自供電 p-GaN/i-ZnGa O24 /n-ITO 異質結寬帶紫外線光電探測器與高工作溫度

    更新時間:2024-09-26點擊次數:223

    IEEE ELECTRON DEVICE LETTERS, VOL. 44, NO. 5, MAY 2023

    737

     

     

     

     

    Self-Powered p-GaN/i-ZnGa2O4/n-ITO Heterojunction Broadband Ultraviolet Photodetector With High

    Working Temperature

    img1Yongxue Zhu, Kewei Liu , Member, IEEE, Xiaoqian Huang, Peixuan Zhang, Qiu Ai, Zhen Cheng, Jialin Yang, Xing Chen, Binghui Li, Lei Liu, and Dezhen Shen

     

     

    Abstract A self-driven p-GaN/i-ZnGa2O4/n-ITO hetero- junction  broadband  ultraviolet  (BUV)  photodetector was

    firstly demonstrated in this work with a high working temperature.  In  the  25-300  ?C  temperature  range,   the

    device exhibits excellent and stable BUV    photodetection

    performance. Even at 300 ?C,  a  large  peak responsiv- ity  of  132  mA/W,  a  broad  UV  response  band  ranging

    from 250 to 400 nm, a high UV-to-visible rejection ratio of nearly 104, and a high ?3 dB cutoff frequency of 20 kHz

    can be still observed at 0 V, which is obviously superior to the other reported high-temperature BUV heterojunc- tion photodetectors. The remarkable performance of our device at high temperature can be attributed to the excellent insulation and high crystalline quality of i-ZnGa2O4 layer, as well as the good electrical properties of p-GaN and n-ITO. Moreover, their wide and complementary band gaps make the device have a very broad UV detection band.

    Index TermsBroadband ultraviolet photodetector, het- erojunction, high-temperature, self-powered, ZnGa2O4.

     

    I.       INTRODUCTION

    B

    ROADBAND ultraviolet (BUV) photodetectors (PDs) have drawn significant  attention  in  recent  years because of their wide applications in flame detection, space exploration, missile plume detection, environmental and biological research [1], [2], [3], [4]. Since many    applications

    Manuscript received 21 March 2023; accepted 26 March 2023.  Date

    of publication 29 March 2023; date of current version 26 April 2023. This work was supported in part by the National Natural Science Foundation of China under Grant 62074148, Grant 11727902, and Grant 12204474; and in part by the National Ten Thousand Talent Program for Young Top-Notch Talents and Youth Innovation Promotion Association, Chinese Academy of Sciences (CAS), under Grant 2020225. The review of this letter was arranged by Editor T.-Y. Seong. (Corresponding author: Kewei Liu.)

    Yongxue Zhu, Qiu Ai, Zhen Cheng, and Jialin Yang are with the State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China.

    Kewei Liu, Xiaoqian Huang, Peixuan Zhang, Xing Chen, Binghui Li, Lei Liu, and Dezhen Shen are with the State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China, and also with the Center of Materials Science and Opto- electronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China

    Color versions of one or more figures in this letter are available 

    Digital Object Identifier 10.1109/LED.2023.3262755

    require stable devices capable of working at high temperature, it is obviously necessary and important to realize thermally stable PDs [5], [6], [7], [8], [9], [10]. Benefiting from the complementary band gaps, the heterojunction PDs provide a huge potential for broadband detection [11], [12]. Moreover, the built-in electric  field  at  the  heterojunction interface could effectively separate the photo-generated carriers, allowing the device to work without external bias [13], [14], [15]. Because no additional bias voltage is required, the heterojunction detector in self-driven  operation  mode could be completely free from the restriction of dark current when operating at high temperature. Therefore, the self-powered heterojunction PDs formed from different wide-bandgap semiconductor materials, such as, r-GO/HR-GaN [2], β-Ga2O3/4H-SiC [16], Ga2O3/ZnO [17], diamond/β-Ga2O3 [18], Graphene/(AlGa)2O3/GaN [19], and so  on,  have become ideal candidates for  preparing  BUV  devices  that can meet the requirements of high-temperature applications. Although numerous excellent heterojunction devices have been demonstrated with broadband UV response and zero power consumption, the device performance often deteriorates rapidly as the operating temperature increases [2], [17], [19], [20]. The main reason for this phenomenon is that almost all the reported BUV heterojunction devices are based on simple p-n or n-n structures. With the increase of operating tem- perature, the ionization rates of the p- and n-layers increase, leading to the narrowing of the depletion region, which would reduce the quantity of photo generated carriers in   it.

    Compared with p-n heterostructure, p-i-n  heterojunction has special advantages, such as higher responsivity, faster response speed and higher reliability, thus allowing higher operating temperature [21], [22], [23], [24], [25]. In this work, a self-driven BUV PD, which still has excellent optoelectronic

    detection capability even at 300 ?C, has been demonstrated

    for the first time on p-GaN/i-ZnGa2O4/n-ITO heterojunction. P-GaN, i-ZnGa2O4 and n-ITO with band gap  energies  of 3.40, 5.10 and 3.85 eV at room temperature were fabricated by molecular beam epitaxy (MBE), metal organic chemical vapor deposition (MOCVD) and radio-frequency magnetron sputtering, respectively.

    Benefitting from the good crystalline quality and excellent insulation of i-ZnGa2O4  layer and high electrical conductivity

     


     

    img2 

     

    Fig. 1. (a) Side-view SEM image and (b) ω-2θ scanning pattern of the p-GaN/i-ZnGa2O4/n-ITO heterojunction.

     

    of p-GaN and n-ITO, our p-i-n heterojunction device  can work in a wide temperature range with excellent performance. At 300 ?C, the device shows a broad UV response band ranging from 250 to 400 nm, a high peak responsivity  (Rpeak)

     

    img3 

     

    Fig. 2.  (a) Carrier density and mobility of p-GaN and n-ITO layers versus

    2

     

    of 132 mA/W at 352 nm, UV-to-visible rejection ratio of

    temperature. (αhν)

    as a function of (hν) of (b) n-ITO, (c) p-GaN    and

     

    nearly 104, and a high ?3 dB cutoff frequency of 20 kHz.

    II.       MATERIAL EPITAXY AND DEVICE  FABRICATION

    The Mg-doped p-GaN film was firstly grown on undoped GaN (u-GaN)/sapphire template at 750 ?C by MBE. During growth, the N2 flow rate was fixed at 1.8 sccm with radio frequency power of 350 W, and the temperatures of Mg and Ga cells were controlled at 343 and 1120 ?C, respectively. Subsequently, i-ZnGa2O4 film was deposited on the p-GaN layer by MOCVD. Diethylzinc and  trimethylgallium  with high purity nitrogen as carrier gas and 5N-purity O2 were employed as Zn, Ga and O sources, respectively. The chamber pressure was kept at 23 Torr and the substrate temperature was  maintained  at  650  ?C.  After  that,  n-type  indium    tin

    oxide (ITO) was fabricated on i-ZnGa2O4 layer by radio- frequency magnetron sputtering. Ni/Au (50/50 nm) and In (100 nm) have been used as the ohmic contact electrodes to p-GaN and n-ITO, respectively.

    The material characterization was performed by a scanning electron microscope (SEM) (HITACHI S-4800), a Bruker D8GADDS X-ray diffractometer (XRD), a Lakeshore Hall effect measurement system and an UV-3101PC scanning spec- trophotometer. Agilent B1500A semiconductor device ana- lyzer was used to measure the  time-dependent  current (I-t) and current-voltage (I-V) curves. 310 nm light was produced by light emitting diode (LED). A monochromator with a UV-enhanced Xe lamp (200 W) was used to measure the spectral response of the  device.

     

    III.       RESULTS AND DISCUSSION

    Fig. 1a presents the side-view SEM image of the p-GaN/ i-ZnGa2O4/n-ITO heterojunction. The thickness of n-ITO, i-ZnGa2O4  and  p-GaN  layers  can  be  estimated  to  be about

    40 nm, 200 nm  and  600  nm,  respectively.  Fig. 1b  shows the ω-2θ scanning patterns of p-i-n heterojunction  prepared on  u-GaN/sapphire  template.  Besides  the  sapphire substrate

    diffraction peak, the peaks at 2θ  = 31.1?  and 34.6?  can    be

    respectively attributed to the (100) and (002) planes of    GaN.

    And the diffraction peaks located at 18.85?, 37.56?, and 57.48? can be assigned to the (111), (222), and (333) crystal facets  of

    ZnGa2O4, respectively [26]. The strong and narrow diffraction

    (d) i-ZnGa2O4 layers at different temperatures.

     

    img4 

    Fig. 3. (a) C V, and (b) I V characteristics of the p-GaN/i-ZnGa2O4/ n-ITO   heterojunction   at   different   temperatures.   The   insets      of

    (a) and (b) are the schematic device structure and the I V characteris- tics of In/n-ITO and NiAu/p-GaN contacts, respectively.

     

    peaks in XRD pattern indicate that both p-GaN and i-ZnGa2O4 have good crystalline quality.

    To research the optical and electrical properties, optical absorption measurements and  Hall  effect  were  carried  out at various temperatures of 25, 100, 200,  and  300  ?C (see Fig. 2) The hall mobility and carrier density of p-GaN layer

    were measured to  be  5.4  cm2/Vs  and  4.0  × 1018 /cm3 at  25  ?C.  With  the  increase  of  temperature,  the ionization

    rate of acceptor impurity increases, leading to the increase in hole concentration. At the same time, Hall mobility decreases with increasing temperature. In contrast, the electron   concen-

    tration and mobility of n-ITO at different temperatures were similar, which can be estimated to  be  1.4  ×  1020  /cm3 and 25 cm2/Vs. Variation of (αhν)2 versus the photo energy (hν) of n-ITO, p-GaN and i-ZnGa2O4  under various  tempera-

    tures are shown in Fig. 2b, 2c and 2d, respectively. The band gaps of ITO (3.85 eV at 25 ?C), GaN (3.40 eV at 25 ?C) and ZnGa2O4 (5.10 eV at 25 ?C) narrow with increasing temperature, and decrease by 0.19 eV, 0.15 eV and 0.20 eV from 25 to 300 ?C,  respectively.

    To  further   investigate   the   photodetection  performance, a  cylindrical  p-GaN/i-ZnGa2O4/n-ITO  heterojunction device

    with a diameter of 0.66 mm was fabricated (inset of Fig. 3a).

    The quasi-linear  I V  curves (inset of Fig. 3b) of In/n-ITO/In

    and NiAu/p-GaN/NiAu indicate that both p- and n-type con- tacts are Ohmic in nature. C-V characteristics of the device are characterized at different temperatures as shown in Fig. 3a.

     

     

    TABLE I

    img5img6img7img8COMPARISON TABLE  FOR SELF-POWERED HETEROJUNCTION HIGH-TEMPERATURE UV   PDs

     

     

     

     

    img9 

     

    Fig. 4. (a) Spectral response and (b) time-dependent current mea- sured from 25 to 300 ?C under 0 V applied bias. (c) Temporal photo response (at 300 ?C) under the modulated light of a 310 nm LED.

    (d) (Imax ? Imin)/Imax versus illumination modulation frequency under various temperatures.

     

     

     

    At 0 V, the capacitance of the detector is about 180 pF at 25  ?C, 184  pF  at  100  ?C, 200  pF  at  200  ?C, and  1.47 nF

    at 300 ?C.

    Below 200 ?C, the capacitance of the device almost does not change with the bias voltage, indicating that i-ZnGa2O4 layer has been completely depleted. When the temperature rises to more than 200 ?C, impurities in i-ZnGa2O4 layer would be ionized, leading to a slight narrowing of the space charge region, which further results in the increase of capacitance. Fig. 3b presents the dark I-V curves of the p-i-n PD  at different temperatures and clear rectification characteristics can be acquired.

    Fig. 4a  shows  the  spectral  response  measured  from  25 to 300 ?C under 0 V bias. A broadband UV photoresponse (10% of Rpeak) ranging from 250 to 400 nm can be clearly observed at all temperatures. According to the experimental band gaps of three semiconductors in our device (ITO: 3.85 eV, ZnGa2O4: 5.10 eV, GaN: 3.40 eV), the response in the UVA/UVB region should be mainly attributed to p-GaN and n-ITO layers, while the response in UVC region is mainly associated with i-ZnGa2O4 layer. Additionally, with increasing the temperature, the long-wavelength cut-off edge determined by p-GaN layer shifted towards the longer wavelength region due to the decrease of the band gap. At 300 ?C, the peak responsivity at 352 nm is as high as 132 mA/W, and a high UV-to-visible  rejection  nearly  104  was  obtained.  To further

    study the response speed characteristics, the I-t curve was measured by turning ON/OFF a 310 nm LED (0.768 mW/cm2) under various temperatures at 0 V (see Fig. 4b). Obviously, the device presents an excellent ON/OFF switching property with fast speed, good reproducibility and high stability at all temperatures. Due to the self-powered operating mode, the device maintains a high ON/OFF current ratio of more than

    103 at 300 ?C. To further estimate the response speed, the normalized temporal response (at 300 ?C) of the device were measured at 0 V by oscilloscope under 310 nm modulated LED illumination with different modulation frequency (see Fig. 4c). And the rise and decay times can be estimated to be about 13 µs and 14 µs, respectively. Even at frequencies up to 50 kHz, the device still  maintains  good  optoelec- tronic detection capability. Fig. 4d plots the relative balance

    (Imax?Imin)/Imax as a function of illumination modulation frequency at different temperatures, where  Imin  and  Imax    are

    the minimum and maximum current obtained by switching ON/OFF 310 nm light at each frequency. As the modulation frequency increases, the relative balance gradually decreases, and the ?3 dB cutoff frequency of the detector exceeds 20 kHz at all temperatures (see Fig.  4d).

    Some key parameters of the high-temperature self-powered heterojunction PDs were summarized in Table I. It  can  be seen that our device has the fastest response, the widest response band and the largest responsivity speed at high temperature. In fact, most of the reported devices have only observed the UV response at high temperature, while the detailed performance parameters are rarely studied. The high crystalline quality and excellent insulation of i-ZnGa2O4 layer, as well as the good electrical properties of p-GaN and n-ITO could account for the  superior  photodetection  performance of our device at high temperature. Moreover, their wide and complementary band gaps enable the broadband UV detection.

     

     

    IV.       CONCLUSION

    In summary, a high-temperature self-powered heterojunc- tion BUV PD was demonstrated based on p-GaN/i-ZnGa2O4/ n-ITO structure. Benefitting from the excellent insulation of i-ZnGa2O4 layer, good electrical properties of p-GaN and n-ITO, and their wide and complementary band gaps,  the p-i-n  heterojunction  PD  shows  a  high  peak  responsivity of

    132 mA/W, a broad UV response band ranging from 250 to 400 nm, a high UV-to-visible rejection ratio of nearly 104 and a high ?3 dB cutoff frequency of 20 kHz at 300 ?C. The result reported in this letter provides a feasible way for developing

    BUV PDs with high operating  temperature.

     

     

     


    a级毛片无码免费真人久久| 人人妻人人澡人人爽视频| 全免费a级毛片免费看无码| 国产91对白刺激露脸在线观看| 男人激烈吮乳吃奶视频免费| 97精品一区二区视频在线观看| 亚洲欧美洲成人一区二区| 日本中文字幕免费| 青青草华人在线| 亚洲av永久中文无码精品综合| 九九国产在线视频| 蜜桃视频app下载入口| 国产v亚洲v天堂a无码| 精品无码一区二区三区爱欲九九| 久久久久久人妻一区二区三区| (无码视频)在线观看| 亚洲男人第一av网站| 日本亚洲色大成网站WWW久久| 久久精品这里热有精品| 偷拍激情视频一区二区三区| 性奴sm虐辱暴力视频网站| 伊人久久大香线蕉综合网| 野外做受三级视频| 在线a亚洲老鸭窝天堂| 亚洲国产另类精品| 久久综合伊人77777麻豆| 大尺度无遮挡激烈床震网站| 国产啪亚洲国产精品69堂| 久久久精品2019中文字幕之3| 99久久国语露脸精品国产| 久久亚洲中文字幕精品一区| 国产综合亚洲欧美日韩一区二区| 国产99久久久国产精品~~牛| 国产韩国精品一区二区三区| 久久久99精品国产一区二区三区| 亚洲AV无码乱码国产精品品麻豆| 99久久er热在这里只有精品99| 亚洲精品无码久久久久久电影网| 亚洲色一区二区三区四区| 天天摸天天做天天爽| 国产午夜福利久久精品|